Slurp'it is a container-based platform and therefore it's really easy to switch from Production to Acceptance or Development mode. To do this you have to set the relevant...

Slurp'it is a container-based platform and therefore it's really easy to switch from Production to Development mode. To do this you have to set the relevant container image tag...

What is a Driver? A Driver is being used for Slurp'it to connect to the devices to get the Data.By Default we support a lot of drivers already, so before you submit a new driver...

Often we hear that customer are separating their Subnets in smaller blocks to optimize the inventory discovery with the Device Finder. It's good to know that the Slurp'it Device...

Often we heard from customers that most Discovery Solutions add their device with the wrong IP !! It's good to know that the Slurp'it Device Discovery has therefor an build-in...

Slurp'it is a container-based platform and therefore it's really easy to switch from Production to Acceptance mode. To do this you have to set the relevant container image tag in...

This major update requires a bit of changes for your running setup. We tried to make it as easy as possible, you can run the following script to automate the process on Docker:...

We recommend for every 3000 devices to spin up a dedicated Scanner & Scraper. This way you can devide the load of collecting data from the Network over multiple physical...

The Profiler is building an unique Profile per network device. Currently this profile contains the following: Prefered SSH vault Remembers the Vault ID that worked last time and...

Basic installation information is available in our Knowledge Base, including YouTube videos that guide you through installing Slurp'it from scratch.[Click here] For more advanced...

Maybe a 'Device' should be learned on a different IP address, or it should be not added at all. This is possible with the 'Ignore Device' Transform rule. We can create a rule...

It can happen that we don't recognize a new vendor or hardware model. But no worries, our device recognition database can be easily extended. If you share with us your incomplete...

What is a Driver? A Driver is being used for Slurp'it to connect to the devices to get the Data.By Default we support a lot of drivers already, so before you submit a new driver...

What is a planning? A Planning is being used in Slurp'it to define your strategy in collecting data: Which data do you want to collect For what vendors What commands should be...

1. Enable LDAP LDAP is only available with an Enterprise License. If the correct license is installed, you can enable it in the portal by going to Settings > Authentication...

By default our Device Finder will scan an IP or Subnet by using the following logic: ICMP ping If response try to connect with SNMP until we have a response or the time-out will...

Our Network Discovery solution is fast and agile, but depending on your network it needs the proper amount of hardware to function. The more data it collects to more indexes it...

Slurp'it has a build-in Backup & Restore function. Schedule a interval or even do manual backup & restores.Step by step guideSetup the volumes slurpit-warehouse:    ...